Maytag Ensignia 3.3 cu. ft. Top Load Washer "washer spin cycle clicks until" Questions

Ad

...spin cycle My washer starts washing fine until 3 minutes left to go. Then it starts knocking and clicking and flipping out. In a 6 min wash, it runs fine for 3 mins, in a 9 min wash, it runs fine for ...

Ad

Washer stops before the first spin cycle after it has drained and continues when I spin the dial a bit. My Frigidaire FWS833A Top Load Washer fills up and agitates but more often then not, it will ...

Ad

Question about Electrolux Washing Machines

1 Answer

should hear a click when the lid closes. If you don't hear it, the lid switch might be faulty and this will prevent the washer from going into spin. Not an expensive repair. http://tclaundryrepair.com

Question about Tecnik Washing Machines

2 Answers

...spin cycles. My washer fills up with water and goes thru the wash cycle but when it's time to drain, it just sits there and clicks. Your drain hose or sump pipe between pump and drain point has a ...

...washer will work until the spin cycle. In spin cycle the door lock clicks and it will not drain or spin Make sure the drain filter is not clogged. Most Samsung have an access door in the lower right ...

Question about Whirlpool Washing Machines

1 Answer

...Spin Cycle At the end of the last spin cycle, the tub makes a clicking type noise until the basket stops spinning. The drive block was replaced last week. Any thoughts? Thanks did you do it up tight ...

Question about Whirlpool Washing Machines

1 Answer

...washer runs fine until rinse or spin cylcle then it kind of works for a minute then does a weird thing where it clicks off and on after a couple minutes it stops completely after 5 or so more minutes ...

...washer will begin its cycle even if the on/off button is not pushed. It will fill and go through cycles until it gets to the spin cycle. The pump motor will then drain the unit but the spin will not ...

Question about General Electric Washing Machines

1 Answer

...washer fills then starts to agitate then stops,same with the spin cycle,it starts to spin then quits.If you turn off machine during the cycle then turn it back on,it starts again then quits.Same with ...

Question about Whirlpool Washing Machines

1 Answer

...washer clicks 2 or 3 times a second after the wash cycle when it is trying to spin. It seems like the motor cuts on and off over and over and over, so the spin never gets up to the correct speed. ...

Not finding what you are looking for?
Maytag Ensignia 3.3 cu. ft. Top Load Washer Logo

118 questions posted

Ask a Question

Usually answered in minutes!

Top Maytag Washing Machines Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Brad Brown

Level 3 Expert

19187 Answers

john h

Level 3 Expert

29494 Answers

Are you a Maytag Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...