Maytag Ensignia 3.3 cu. ft. Top Load Washer "washer drum moved location" Questions

Washer was moved from one location to another; when turned on at new location it makes a noise and code of DR Many washers have a sipping rod or bar that needs to be inserted into the unit from the ...

...drum is not balanced and cannot rotate freely, I would suggest contacting a professional so they can move forward accurately. Washer may possibly have a faulty bearing, unbalance drum or pulley

...washer makes noise when the spin cycle ends or if the lid is opened during the cycle. The agitator stops moving but the drum continues to spin till stopped. It acts as if the agitator is rubbing on ...

washer or from the drain. The drum moves and the screw moves with it and eventually gets hung up on something at the top of drum. I am desperate for any ideas anyone may have. I purchased an endoscope

...then you may have dislodged the drum bearing or broken the drum bearing spider. The part is located at the back of the drum. Did the movers re-install the 3 shipping bolts in the rear of the

...washer makes loud noise during the spin cycle. I think the drum is off center. How do i fix it? try moving the cloths around to even the load out my washer does this alot. Remove the lid of the ...

...washer drum knocking. On inspection, drum is turning off axis and the front, where woven material is located, has been torn from its out of balance rotation. It seems like whatever the bearing system ...

...washer and adjust the jet back to is position connected to the drum then clean any form of dirt around it but if you need to get another one apply online on at www.appliancecanada.com/ full of ...

drum spring has fallen off when moving machine out to put belt back on I put machine on side and drum spring has fallen off can't locate were to put it back. thanks If you look at the opposite side to

washer will not spin. motor runs. can move drum by hand. how do I remove the transmission if that is the problem Check the lid switch, it is located under the top base frame, look where lid male ...