...set too high for the Beovision 7 to display signal. If you are using the Beovision 7 as your primary monitor, first connect a known-working monitor to the computer and reduce the resolution to ...
...computer and / or laptop in is 1024x768...otherwise it scrolls! Any suggestions? Is it the graphics card...or tv? output resolution is different from supported input resolution you need to check in ...
...set up the TV to act as my computer monitor? Thanks, Make sure you set the laptop to display at a resolution the TV can display, it seems best to start with 1024x768 then work up. If you are using a ...
...computer starts up, it shows the DELL screen and the Windows screen, but before it gets to the login menu, the screen goes black and then says "No Input" What should I do? I have tried setting the ...
...computer (as well as another laptop w/dvi out) are not able to detect the tv. Not sure if you have fixed your problem or not. When I hook up my pc to the ILO 32 HD...I ran DVI input for picture...you ...
...set resolution to 1024 x 768 from there you will not see anymore the Input Signal Out Of Range Start your computer. When the bios info page turns to black (as if about to start loading Windows) press ...
...set it for PC or VGA (depending on what's in your menu) Ok, now that I have found the manual...here are excerpts from it: 1. Turn on the PC. 2. Use the tv/video or multimedia button on the remote ...
...set @ 800x600 resolution, If not on-screen text is very difficult to read, and if your graphics support it, diddling with smoothing also helps. Oh and by the way, When calling for support KXD told me ...
112 questions posted
Usually answered in minutes!
255 Questions
269 Questions
227 Questions
221 Questions
201 Questions