Fisher and Paykel (IWL12) "remove door seal" Questions

...holding the door switch 5: remove clamparound the door seal and remove front panel (2 screws bottom and 2 up) 6: remove clip around door seal that holds tothe tub 7: replace seal.... there you

...remove door. 3 Remove spring tensioned wire from groove in rubber door seal and ease rubber off front cover 4 Remove soap dispenser and remove the screw this reveals. 5 Remove 2 screws from bottom of ...

...Remove the door seal. Fit the new door seal. Fit the retaining ring ensuring the seal is properly clamped/sealed to the outer tub. Refit the front panel, reach in and fit the door lock to the front ...

...door then turn power off. Remove 3 bolts on front of machine. Remove the soap draw and remove the 2 (or 3) screws.Separate the front of the door seal from the metal front of the machine and fold the ...

...band securing the seal to drum front. remove door seal. Fit new door seal, making sure the drainage holes are at the bottom dead center. reassemble in reverse order. Please rate my solution.

...Remove the door and set aside. Locate the screws for the front of the machine and remove them, gaining access to the seal. Youcan either set the door to the side with the door lock wires still ...

remove the door or place it on blocks of wood. (IF you remove it) It is a matter of loosening the screws removing the old door seal and fitting the new door seal in place. (Tighten the seal mounting /

remove the 1 at the door opening, this will allow acces to the 1 at the drum. If you remove the machine lid it will give you a bit more light to work with and you may be able to access the ring easier

...door itself. Carefully remove the screws or clips, taking note of their location for when you reattach the seal. Gently pull the old door seal away from the door and set it aside. Take the new door ...

...door seals on machines ( which sometimes can take three hands) is to remove the front of the machine. To do this on a beko Power off Remove kickboard You will find three screws for the front cover ...