Western Digital Caviar WD800BB 80 GB Hard Drive "slave jumper" Questions

WD drive won't work as master when Seagate 80GB drive connected as slave. New WD1600AAJB as master - works fine alone. I want to use Seagate 80GB as slave. Won't go. Computer stalls on start up. Both ...

...jumper settings for slave drive WD1600JS The BIOS is AMI. Under ADVANCED SETUP: The options listed for 1st,2nd ,3rd Boot device include: IDE-0 means Pri master ? IDE-1 means Pri slave ? IDE-2 means ...

...slave ? thanks you can find the jumper settings printed on the top of western digital caviar hard drives slave setting with the hard drive end jumpers facing you is 2nd from the right or 4th from the ...

What Jumper Setting Do I Need To Use A WD800AAJS As A Slave Drive? look closely at the back of the hard drive, in small print it should say where to put the jumpers to make it a slave

...aspx?sq=wd%2080%20hard%20drive&sl=en-US&sc= Good day!Google the settings of that brand..usually I put the jumper in the middle for both master and slave present will occur.. regards, ...

... slave　 :::': note the plastic jumper is ' located at the rear of the hard drive next to the IDE/SATA lead/s 　 hope this helps 　　　 hope this ...

...jumper SATA, so there is no Master/Slave/Cable Select setting available. Suggestions to be able to get it up and running - not as boot drive, but just so I can copy data off of it? During the boot ...

...on the back of both hard drives. You need to set the primary hard drive jumper to MASTER and the secondary hard drive jumper to SLAVE. Here is a picture of the jumper settings. I hope this helps

jumper setting for wd200bb 20gb hard drive for slave Slave - Installing the new drive as the secondary drive: If installing your new Western Digital hard drive as the secondary drive on the cable with

...slave hardrive. What should the poistion of the jumper be. Thanks This is a SATA drive, and they don't use master and slave jumpers. They are serial devices, and each SATA drive is connected to its ...