Western Digital Caviar WD800BB 80 GB Hard Drive "slave" Questions

need jumper settings for slave drive WD1600JS The BIOS is AMI. Under ADVANCED SETUP: The options listed for 1st,2nd ,3rd Boot device include: IDE-0 means Pri master ? IDE-1 means Pri slave ? IDE-2 ...

WD drive won't work as master when Seagate 80GB drive connected as slave. New WD1600AAJB as master - works fine alone. I want to use Seagate 80GB as slave. Won't go. Computer stalls on start up. Both ...

...The options listed for 1st,2nd ,3rd Boot device include: IDE-0 means Pri master ? IDE-1 means Pri slave ? IDE-2 means Sec master ? IDE-3 means Sec slave ? 　 The BIOS is AMI. Under ...

...pin placement is if i add another hard drive on the same ribon? whitch hd. is master and whitch is slave? The hard drive that you have your operating system on is the master, and the one for storage ...

...The options listed for 1st,2nd ,3rd Boot device include: IDE-0 means Pri master ? IDE-1 means Pri slave ? IDE-2 means Sec master ? IDE-3 means Sec slave ? 　 The BIOS is AMI. Under ...

WD1001fals as slave pinn settings SATA Hard Disk as a Slave b> An SATA hard drive is an internal hard drive that connects to your computer's motherboard. It is even possible to connect multiple drives

wd1600aajs slave settings Hard Drive a Slave Drive Setting a hard drive to function as the secondary ("slave") drive allows you to use the drive solely as a storage unit. You can use the drive to back

...that there is a diagram on the device that will tell you which settings are for Master/Primary and Slave. You want to set it up as a Slave. Sometime the connection ribbon from *********** board will ...

I am about to take a WD1600JD hardrive out of one PC and put into a newer PC as a slave hardrive. What should the poistion of the jumper be. Thanks This is a SATA drive, and they don't use master and ...

how do you turn a hard drive from master to slave Hi, To set a IDE Hard Drive as Slave you would need to change the jumpers/pins on the back of the drive See this link Here