Western Digital Caviar WD800BB 80 GB Hard Drive "jumpers" Questions

...hard drive as the only hard drive in your system, leave the jumper in the neutral storage position. Jumpers are not required for single hard drive installations. For more information visit this link ...

how can I clean boot record password You have to clear this in BIOS. Power off you PC, change jumper on motherboard for you specific board (Have to look it up) place jumper setting where indicated 5-6

Caviar 40 GB jumper settings WD400BB/LB Caviar HDD Jumpers Set the jumper(s) for your specific installation requirements according to the picture.

I need the jumper settings for the wd2500BB. Your drive has a ten pin jumper, go to the web page link below for illustrations and directions on jumper settings for all WD drives ...

how do set the jumpers on the HD to slave ? thanks you can find the jumper settings printed on the top of western digital caviar hard drives slave setting with the hard drive end jumpers facing you is

...Add Hardware but it tells me that the driver it's not installed. I use XP as OS. There should be jumpers on the back of both hard drives. You need to set the primary hard drive jumper to MASTER

need to know what is jumper setting for cable select on all western digital hard drives Welcome to Fixyah, Jumper settings procedure will located at the front of that disc and it will show where the ...

my western digital wd800bb caviar, has no label telling me about jumper settingscan you help? I want to add it to my system as a secondary hard drive, my system has a lead that fits so I just need the

is a 80gig western digital hard drive compatableto a asus p2p pentium 2 celeron motherboard if so what are the jumper settings for the hard drive and do i have to change my jumper settings on the ...

what is the jumper setting for wd200bb 20gb hard drive for slave Slave - Installing the new drive as the secondary drive: If installing your new Western Digital hard drive as the secondary drive on ...