...reset the Admin password to the default, so it will probably be necessary to repeat this procedure, entering 456 the second time, to factory default the phone. The solution posted by dick_shivers did ...
Question about Polycom IP Computers & Internet
...reset to default when using MAC address as password I've tried to reset the default on the Polycom 501 and it won't allow me to use the MAC address as the password If your phone isn't ...
...reset a lost admin password to default: at phone boot, during the 5 second countdown, push/hold 468* on the phone. Enter the phone's MAC address as the password. This will reset network info but keep ...
...D/E/F can be entered via the [3] key. For example, an IP Phone with MAC address 00:19:E1:E2:17:12 would be reset to "factory default" when the sequence **73639001931321712## is entered on the
...reset the IP Phone Password and Connect it to some Other TFTP IP address(Another OXE) to register. In industrial mode, the set will only work in a specific sub network, and default IP address - ...
Question about Grandstream Computers & Internet
reset it to factory settings? From the Granstream User Manual (Page 44): Restore Factory Default Setting WARNING: Restoring the Factory Default Setting will delete all configuration information of the
Address field. Any help? Try to manually reset the phone - **#"Settings" (this will unlock the configuration) + Network + menu under number "33" - erase the configuration. Then the phone configuration
...reset to default, and choose that. *Note- This will reset all values of the phone. If it's Ethernet Only, it's fine. If the phone is using a Static IP, it will also clear the IP addressing on the ...
default IP address for BGP510...i tried to reset the device too..but still the same thing...plz help.. BGP510-->PC....make sure computer getting correct default gateway as u said. if so, go to command
...address it began to read "Ethernet Cable Unplugged" even though it is definitely plugged in. I can't ping the phone. I am not sure what is wrong or needs to be added to make this work. Hi, I bought ...
62 questions posted
Usually answered in minutes!
7 Questions
13 Questions
9 Questions
5 Questions
1 Questions