Fisher and Paykel Fisher & Paykel Washer "2 blows" Questions

...2 6 kg Washing Machine Blows 6 amp fuse in top panel. On spin cycle runs the pump but motor wont rotate for spin. If left blows fuse again. Remove the hoses and check the impeller of the pump for an ...

Washing machine keeps blowing fuses when does it blow a fuse 1 as you start the machine 2 or how long after the machine starts 3 at the end in spin

blow breaker hi! my kenmore washing machine is 3 years old i have had the repair man here 2 times this year. today i go to start it, it blow the breaker. can you help me. thank you! I need the model n

...control keeps blowing out? The fuse was blowing out twice a year. Now the fuse is blowing every 2-3 loads. No water goes in the drum - washer just stops. Why is this? IF water is not going in the ...

...it must think its full of water already. you would need to pop open the control panel. either 2 screws located on back of console (while looking over the top of machine and straight down you ...

My washing machine has been in storage for 2 years. It worked perfectly before. Now it does not want to drain water. What should I do? It is a LG WF-T8018TP Fuzzy Logic yopu mmioght need to replace ...

washer will not stop filling up i have a kennmore washer that is 2 years old.Water will comes into washer at start up however when it gets to the top level on it keeps on running and flows over into ...

...binary 49 LED code. I chased the circuit through the Motor Controller (brown one in Australia) GW712. It was a couple of FETS or Qs in a H drive. The get fed their +v from the main power rectifier. ...

...blows the trip.The socket and plug are in good condition.The machine sat unused for 2 weeks whilst on holiday,then has blown trip ever since. It is best to disconnect the mains lines from the control ...

...blows the breaker on the GFCI outlet it's plugged into. Have tried it on 2 different outlets and the behavior is the same... seems something inside the washer is shorting or overloading and ...