...check for brush rotation. - Unplug the power cord and remove the handle completely. Slide handle back into the lower section of handle, ensuring the screw is in tight. If the handle is not aligned ...
Check to see if the shaft on the brush block hasn't broken off. Otherwise it is the turbine that drives the brushes and is either clogged up inside or needs to be replaced. I took our Hoover in to the
...brush is out, check the ends for signs of damage that may cause the brush to bind. Also, check the area the brush connects to. Reattach the brush and try to spin it. If it spins freely, put your ...
...check? So brush doesnt spin. Belt good, roller is clean, can I check voltage when the head is off? Continuity measures? A broken drive belt, damaged brush roll, jammed brush roll bearings, tripped ...
...brush switch is turned on brushes not turning are usually caused by the turbine bearings have seized. The turbine cost is about $35 average. on the bottom you can check a pull out filter to clean. ...
...brush assembly for any obstruction and even check to see if all the brushes still spin okay. If all looks good then align the post on top of the brush assembly with the hole on the bottom of the ...
...check for brush rotation. - Unplug the power cord and remove the handle completely. Slide handle back into the lower section of handle, ensuring the screw is in tight. If the handle is not aligned ...
...check the brush belt, please follow these directions: Turn the machine OFF and unplug from the wall outlet. Step on the handle release pedal to lay the handle down on the floor. Remove the ...
...Check the brush end bearings for wound-up thread, hair, and other debris. Place the brush back without the belt--it should spin freely. Reinstall the belt if it is in good condition and check for ...
32 questions posted
Usually answered in minutes!
191 Questions
140 Questions
90 Questions
79 Questions
30 Questions