remove the blade. I you don't have the tool, just find a big wire around 1/8 diameter. Bend it and insert both ends on the blade holes. Cover the sharp blade with cloth or use leather gloves. Turn and
...remove the blade. If you don't have the tool, just find a big wire around 1/8 diameter thick. Bend it and insert both ends on the blade holes. Cover the sharp blade with cloth or use leather gloves. ...
...remove the blade. IF you don't have the tool, just find a big wire around 1/8 diameter thick . Bend it and insert both ends on the blade holes. Cover the sharp blade with cloth or use leather gloves. ...
...move. try to remove the blade on your juicer and insert it properly. it might cause the unproper worked. make sure that you connected on the right voltage of your conductors. hope that helps! ...
you know which direction it goes, unplug it and turn the blade in the opposite direction to remove. i plug my jack lallanes power juicer to 220v, from then i can not remove the filter.what should i do
...blade tool to remove and to tighten the blade in my Jack Lalanne juicer. Where can I get a replacement? Just find a big wire bend it and insert both ends on the blade holes. Use leather gloves or ...
remove the blade. After you have stabilized the basket from spinning, with the blade, you should be able to turn the crescent tool counter clockwise to remove the blade. Here's the link to the owner's
...don't have the cresent tool to remove the blade. Isn't there a way I can use two screw drivers until iI get one? I removed mine by removeing the 3 screws on the blade and lifting the whole filter
...clockwise onto the drive motor. There should be two holes on the inside of the blade unit, at the bottom of the "bowl." That's where you remove the blade unit for cleaning and reattach and tighten
383 questions posted
Usually answered in minutes!
92 Questions
1 Questions
1 Questions
6 Questions
