Tomtom ONE GPS Receiver "size torx screwdriver needed" Questions

...It's easy to do yourself, but you need the right tool, a size 8 or 9 (I don't remember off hand which it is) torx bit screwdriver, which is itself a little hard to come by (try an auto parts

...maps and its been here for 15 years! If you can find a Torx security screwdriver of the right size you can get to the inside. Since they will not even repair mine for a charge I have no other

...torx screwdriver? what size? Thanks for your help. If the USB port is loose, that means that the port has come of the circuit board. This happened to a friend of mines, his son did not look which way ...

...size silver box IE the hard drive. The rubber end caps are pressed in, pry out with small screw driver.7) Remove battery and replace. Note the two sided sticky tape around battery. When putting more ...

...size silver box IE the hard drive. The rubber end caps are pressed in, pry out with small screw driver. 7) Remove battery and replace. Note the two sided sticky tape around battery. When putting more ...

...Torx type. You can buy them cheaply in sets from size T5 up to T20. First remove screen surround by pushing the windscreen mount clip underneath the tomtom , towards the screen. This will push the ...

...torx driver, sometimes just the right size eye-glass screwdriver can fit but be careful not to strip the heads. Once those are out, you need to seperate the back casing from the front. I used an old ...

...torx driver, sometimes just the right size eye-glass screwdriver can fit but be careful not to strip the heads. Once those are out, you need to seperate the back casing from the front. I used an old ...

...size screwdriver does it take to disassemble the cover of the Garmin NUVI 660? you need a T5 security bit...thats a torx with a hole in the center to prevent tampering...they can be bought on ebay, ...