Reddy Heater-30-55,000 BTU Variable "plug gap" Questions

what is the spark plug gap for a Readdy Heater 35000 BTU? I'm replacing the spark plug, I need to know the spark plug gap, please! Use the same gap that the old plug had.

...plug gap...this might be crucial. my gap was specified on a label stuck on the inside of the bottom of the body. The plug on my unit was way too small. Adjust gap if necessary using feeler guages. ...

...shorting out to ground BEFORE the plug. gap should be 75 thousandths. Ive got 40000 reddy heater 1yr old. plug it in the ignitor glows and fan starts turning, but no fuel comes out. then it shuts ...

...of issues. Cracked fuel line, or cracked air line. Fuel filter partially clogged or impurities in tank. Low fuel pressure or poor spark. Plug partially clogged or fouled or spark plug gap

...plug) and checked the gap. it was about half of the recommended .070 gap. i hope this helps. craig I'm having the same issue. I have a 110 pro, 110,000 BTU. It has a spark plug. When I turn it on the ...

plug type ignitor, remove it and inspect it. The gap setting is the thickness of a dime. The spark plug type heaters have a transformer that sends power to the spark plug to make it spark all the time

dayton ready heater model 3e219c will not light will not light First make sure that th eunit is getting spark and the spark plugs is to gapped at .070 to .080 also you need to make sure that the air ...

...plug and stick a new one in, the gap has tp be 1/8" - I did just that and it worked and then shut itself down - finally found the book and saw the correct gap = it fired right up IF I HAD TO GUESS ...

...plug gap, its mostly wrong and or too great of gap{replace}.....if it has a glow plug type. pull sheild cover off & look inside and see if plug is glowing on start up! If its glowing, clean ...

what is the plug gap on the 55,000 btu. and what kind of plug and #. gap is .60 and i use autolite 65 plug