Reddy Heater-30-55,000 BTU Variable "fire ready" Questions

...fire with cover attached this is pertaning to a 165,000 btu ready heater. the heater fires with the outside cover and performs great, however when the outside cover is attached it will not fire. Bend ...

...fire, in the living room was banging and cracking and sparking. It wasnt switched on, not used for a couple of months, but it was plugged in to the mains. Unplugged it and plug was not warmStunk of ...

...fire up. The pilot is working fine, but when we turn the switch to on and turn up the temperature, nothing happens. We tried to bypass the on off switch and the temperature dial and the pressure ...

...when you are ready to light the fire, that it gets the draw going and it will stay that way. BUT you need to check the seals on the doors because if they are closed you shouldn't get much

ready heater 100,000 btu won't fire up!!!!!!! I't is a older model. there are no # to call. The fan and everything blows, but it acts like it is not getting any fuel or maybe the spark plug is bad. ...

...a tank of heating oil left to burn.I have a gas fire ready to be plugged in but they insist on getting it fixed.What could the prob.be? Replace the ignition element and get the burner box cleaned

Ready heater runs for a few seconds then shuts down even before it fire up how is the in tank fuel filter might need to be cleaned or replaced. Hope this works for you.

my ready heater wont fire up noy sure if its fuel flow problem or spark Take the unit apart and clear all orifices of any debris. If it still doesn't fire, it's more than likely the thermocouple.

...fire up for anywhere between 10 secs. to the point where I have to manually unplug it. The next day or when the heater has totally cooled its initial start is fine then the problem starts all over. ...

ready heater 55. all filters cleaned or replaced . the igniter comes on. cleaned the tip. cleaned the electric eye. it comes on but it won,t fire. is there a tube to the pressure switch you can clean ...