Reddy R155D Utility Heater "fuel" Questions

Toyostove laser 30 has lots of fuel but keeps throwing ee2 code I know the sump is filling up as I drained it to but when I removed fuel line from burner there's no fuel in it Out of fuel Fuel tank ...

my pro temp 60,000 kerosene heater won't fire up.fuel pump screams like it's not getting fuel,but has full tank of fresh fuel.is there a way to prime fuel pump? why would fuel pump be screaming.filled

getting an EE6 after relocating heater. Have fuel getting an EE6 after relocating heater. Have fuel and proper venting. any solutions? EE 6 usually indicates a fuel problem. You said you just moved ...

...weeks, it's the heater in my shop. So far I've checked and cleaned the flame detector, fire pot, fuel nozzle. I removed the fuel pump and disassembled and cleaned that. I have plenty of fuel in

can you burn diesel fuel Hi, If this heater is the Reddy 170,000 b.t.u. heater, model # 170t professional series, then yes you can.It is a multi-fuel heater. Fuels it can use are Kerosene, JP8, Jet A ...

I have a toyostove Laser 73. i have fuel leaking from the reset knob and rubber grommet on the fuel sump. is there a rebuild kit for the fuel sump available? I could not find any part number for the ...

...56, EE2 is showing up. I cleaned the sensor and the heating rod. It doesn't seem to be pumping any fuel. I also cleaned the filter in the fuel sump? Could it possibly be the fuel pump, it doesn't ...

...say E2 missed ignition,dont have owner manual to figure out what to do Common causes for an EE2 -no fuel --out of fuel --tank too low --valve closed --air pocket (recently out of fuel) --clogged fuel ...

I have a clogged fuel line (filter?) I do I remove the bushing without damaging it? FUEL FILTER (For 40/55/60/70/110/115/155/165 Models Only) 1. Remove side cover screws using 5/16" nutdriver. 2. ...

My fuel line got air in it when I changed my tank line. I bled the line and verified fuel to the monitor and then to the pump. When I tried to start it the pump runs (clicks) but the burner will not ...