Reddy R115DT Oil Filled Utility Heater "causes black motor" Questions

...black circle on the back of the motor is what causes the drag. How do I stop it from slipping back? Make sure the all the fins (4 of them) are in the right way. I think they are longer on one side ...

...motor, bearings or the speed sensor.First I would either remove the exhaust pipe from the back of the heater or take the front cover off of the heater and remove the black rubber boot from the fan ...

...black plastic cover where the ventor motor is mounted. Are the cover bolts loose? It is just a slight trickle of water, but it collects and causes rusting of the metal panels. Is there a ?proper? fix ...

...motor starts normally but ignites sometimes quickly and other times very late causing black smoke blowback and out chimney. Electrodes were off little so reset them to specs. No change. I would check ...

...motor is running. If you see water leaking from the switch pull the black tubing off and let any condensation or water drain out. They can trap water occasionally which will keep the switch from ...

black terminal to ground. If I get 25.85 volts on the bottom terminal the rollout is good. If I do not get any voltage on the bottom terminal then the rollout has tripped and can be reset (if equipped

...motor in the heat mode. Newer ones energize the blower through a tiny black or white relay soldered into a circuit board. Those types are "time initiated" and "time terminated" and it could be that ...

...black plastic tube. You can pick it out of the tube with a pick. Another style is located on top of the tank and is of white plastic. Your fuel delivery problem may be air related. The air pump is on ...

Black & Decker BDCH200C Ceramic Heater My heater was working a couple of days ago, now it will only stay on for a few minutes before the caution light comes on. It is plugged in, the filter in clean, ...

Black & Decker BDCH100 had been used for approximately 20 hours before the present problem. The CAUTION LIGHT comes on and no other response from the heater ...no fan and no heat. I have misplaced the