Brother MFC-8440 All-In-One Laser Printer "machine error 71" Questions

Machine error 71 My machine is not working and displays "MACHINE ERROR 71, TURN MACHINE OFF AND CALL BROTHER. We called brother and told us to take it to a repair center. They want $200 to fix it. I ...

...machine error 71 first message "PLS CLOSE COVER" followed by "MACHINE ERROR 71" error 71 is a problem with the polygon motor which is in the laser unit. This error usually means that you would need ...

...machine error 71 How to fix it? What is machine error 71 How to fix it? Error 71 on a MFC-9600 means there is a problem with the motor inside the printer. You can try unplugging and waiting a few ...

...machine error 71 indicates problem with the laser unit motor.. 80% is the motor problem and 20% could be the LVPS board... make sure all the cover and interlock switch are close properly.. as any ...

...will cancel the error but if not canceled you should call the authorized serviceman to fix your machine. Error code 71 Print Unable 71 Turn the power off and then back on again. Polygon motor ...

...error 71 points to your "laser" unit which is pretty deep inside your machine and most likely, only a tech would be able to replace it. once replaced, the code will automatically reset. hth, razors ...

...Machine Error 71 71 says the fuser unit is not installed, it means the fuser lamp is burned out, or the temp. sensors are bad. In either case the best repair is a new fuser which you'll find at ...

brother mfc 8500 machine error code 71 i think it's the scanner but not sure Polygon motor does not synchronize with the reference clock

What is machine error 71 Please reinstall your printer driver after installing fresh windows.

machine error 71 This error means that there is a scanner motor error. Try and remove the error by following these steps: Press MENU *,2,8,6,4. The machine beeps for approximately 1 second and will ...