Brother HL-5240 Laser Printer "amber drum light" Questions

...Laser Printer Problem Paper is coming out crumpled. Red status light on, but paper jam light flashing amber - but can't find any paper in the machine. change the drum , the problem coming from

...amber color. I have checked the toner cartridge and drum both. I also took some black tape and covered the toner cartridge where the sensor looks at the cartridge. It still powered up with the error. ...

...drum light (amber LED) may or may not be on. It is not the only way to tell when the drum unit needs to be replaced. If the failure is premature, it could be caused by an obstruction on that edge of ...

amber. I pressed the go and cancel buttom at the same time. Then paper light stops flashing and toner, drum and red status light come on and stay on as long as i have the buttons pressed down. what do

...amber Toner light i have tried eveyrhing even called brother for helped. they told me to get brother toner for them to help me further. i have tried everything and nth works. my toner light is orange ...

...amber Drum light went on and the three bottom lights (ready, alarm and data) started flashing. I can seem to get it corrected. I do not see any paper jammed in the machine, and the paper that I ...

...drum/paper lights and the status light come yellow for about 5 seconds then they turn off, the status light blinks green and then turns red and stays red. Pressing the GO button has no effect, but if ...

...amber light through out even after changing the toner cartridges. please assist. Great you changed the toner cartridges but you may also need to do the following as well. Imaging drum is low Light ...

amber light on oki c3300I also have this problem.  I have replace all four drum units, to no avail.  I have re-booted and cleaned it of any spilt toner (of which there was very little). 

...amber light is flashing. The manual says that light means that A) the tray is not fully shut B) there is no ink C) one of the drums needs to be replaced D) the toners are not fully locked in place. ...