Hotpoint Aquarius WF220 Front Load Washer "solenoid valve" Questions

Ad

Question about Hotpoint Washing Machines

1 Answer

...valve solenoid connector is the fourth connector from the left (facing the front of the washer) of the central control unit. Disconnect the solenoid wires from its terminals if the resistances of the ...

Ad

...solenoid valve again, or give it a little tap, sometimes they get stuck, when you remove plug, if you had a timer problem, water would stop, your water solenoid valve have to be faulty, if you ...

Ad

Question about Fisher and Paykel Washing Machines

1 Answer

...it with to check the flow rate. I think there 12volt valves, The solenoids would be OK just the valve wont open all the way. The solenoids do come off with a flat blade screwdriver under the

Question about Hotpoint Washing Machines

1 Answer

...Solenoid Valve?????? If yes .... you need to know if your W/P Duet GHW9150P Front Load Washer really has a bad Water Inlet Solenoid Valve for the Hot and Cold water. This valve is where the Hot and ...

Question about Washing Machines

1 Answer

...is leaking--to find which one, turn off one external supply line and after waiting a while, does that stop the leak? If not, replace the other solenoid valve. If yes, replace that solenoid

...valve is controlled by a solenoid which is working if your getting cold water even if slow. This solenoid pulls open the cold water valve it is attached to. This valve has built up calcium and lime ...

...valve Solenoid. Holding it open and waiting for water. So if no water is entering the machine it won't fill up the tub and trigger the water level sensor to continue with the wash cycle. So... check ...

Question about Kenmore Washing Machines

1 Answer

ohmmeter and checking for continuity. A lack of continuity will indicate a faulty solenoid and the inlet valve assy will need to be replaced. Sorry for your trouble and I hope this helped. Best wishes

Question about Washing Machines

1 Answer

...solenoid valve is open circuit 4.there is a problem with the pressure switch (least likely) Cold valve is at the end of blue inlet pipe remove lid and you will see it. f E10 is only appearing when ...

Question about Kenmore Washing Machines

1 Answer

...solenoid valve is open circuit 4.there is a problem with the pressure switch (least likely) Cold valve is at the end of blue inlet pipe remove lid and you will see it. f E10 is only appearing when ...

Not finding what you are looking for?
Hotpoint Aquarius WF220 Front Load Washer Logo

202 questions posted

Ask a Question

Usually answered in minutes!

Top Hotpoint Washing Machines Experts

vince

Level 3 Expert

1234 Answers

gbob59

Level 3 Expert

3042 Answers

James Hehling
James Hehling

Level 1 Expert

11 Answers

Are you a Hotpoint Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...