nasty banging then screaching sounds when entering high spin - any ideas?? sounds like main drum bearings not common but if the bearings are worn you get the banging noise and as it slackens the drive
nasty noise. When I turn the drum by hand there is no noise and feels normal. Hi, Problems with a washing machine not spinning or not draining are often interrelated.. If you are having a problem with
Question about Bosch Washing Machines
nasty clicking sound. Clear pump ,check brushes r ok Hello! If the maschine is keeping to drain, with noise it could be foreign parts at the pump blocking it, or failed pump. If there is some water in
...nasty noise. Question 1 How can anything get in there. Question 2 how can one reach in to remove it even when the rubber seal is removed? I would enter via the sump hole ....Remove the hose 1st then ...
...noise was due to the recirculation pump (situated low down at the back on the other side from the drain hose) which was working, but clogged with a nasty grey 'porridge' of limescale and powder ...
...nasty noise when I use it. Is there anyway to remove it? (Open the drum via a paddle? no has to be completely dismantled unless you can get it out throw hose, call sears buy service smart agreement ...
Squeaky, noisy washing machine My front-loading washing machine is making some nasty squeaking (and slight grinding) noises whenever it starts to spin. Does something need to be oiled? Is this a belt ...
...nasty noise once every turn as the belt tension came on and off that spoke. Good indicator of this would be if you can make the squeak happen when you turn the drum by hand, but this stops when you ...
Question about LG Washing Machines
...noise intermittently during the wash cycle. What could be causing this? It sounds like the tub bearing is faulty. Those bearings are going bad! It will continue to work for a while, sounding more and ...
Question about Asko Washing Machines
nasty noise when spinning. It was caused by the heating element flexing, and touching the spinning drum. The ultimate cause of that was a factory fault in the assembly of the drum backing plate to the
202 questions posted
Usually answered in minutes!
886 Questions
666 Questions
541 Questions
485 Questions
500 Questions