Hotpoint Aquarius WF220 Front Load Washer "loading heat water" Questions

element has voltage water is not getting hot could not find a heating element for washer LSQ9549L unless this is not the real model number. Is this front load or top? I've never seen a top load that ...

...water valve is either faulty or the hot water valve to it is off. The machine normally fills with hot water as it doesn't have a heating element to heat the water and fills with the cold water to ...

On the normal cycle of my Duet front load washer at 37 minutes the machine stops and flashes F5. I push the reset button then the start button and the machine works fine after that. HI. This is a ...

my front load washing machine won't spin and drain the water my machine won't spin and drain the water, a lot of soap remains in the tub pump is clogged Check that it is actually heating the water in ...

washing machine not heating water Washin machines "do not" have heating devices, make sure to check your water heater and turn it back on to get your water heated. That will get you back in hot water ...

water. If it is not, I would suspect the heating element needs replacement. It is programmed to fill with water - then heat it before washing. If the water does not heat, it will just wait....and wait

Loading my Lavamat with 38° Solar heated water Hello Since I live in Spain I am collecting Solar heated water (900 liters at a temperature of 38°). Can I feed this water in to my Lavamat? The Manual ...

In the middle of a load my washer will stop and starts flashing F23? It is a whirlpool duet steam. Hi, F23 means that there is a fault in the heating circuit and the heater is not working This fault ...

F05 error code comes on Water Temperature Sensor Error - Check the Water Temperature Sensor,Heating Element and Element Relay. If during the water heating step in wash cycle,the water temperature ...