Hotpoint Aquarius WF220 Front Load Washer "fitting door seal" Questions

Ad

Question about Hotpoint Washing Machines

1 Answer

door seal???? you can change this yourself,,,under the seal on the case is a wire spring unhook it and the door seal will fold inside the washer,,,on the inner drum you will find the other wire spring

Ad

Question about Hotpoint Washing Machines

1 Answer

door porthole to change the seal. The second is to remove the front of the machine to give better access fitting the seal to the tub. I'll detail the second, if you want to try the first you just miss

Ad

Question about Washing Machines

3 Answers

fitting as a reverse of removal, place the door seal in the groove so it fits like it should, then stretch the spring and fit that into the outer groove round the lip of the door seal at the drum end,

Question about Kenmore Washing Machines

1 Answer

...door seal, just behind the door seal there is a spring clip undo this and fold the seal into the drum were you should see another spring clip undo that as well and the door seal comes out from the ...

Question about EuroTech Washing Machines

1 Answer

...door seal.It can be done through the port hole,difficult but achievable or you can strip the front of the appliance off and do the inner part easier. Unplug the appliance. Open the door and take the ...

Question about AEG Washing Machines

1 Answer

...door seal to a AEG LAVAMAT 66600 Hi, Thank you for contacting fixya.com. Please check this video along with the tutorial to install the door seal in your washing machine:- ...

Question about Bosch Washing Machines

2 Answers

...door to check a tight but easy fit, check for any leaks and correct fitting before leaving machine unattended any time, sound worse that what it actually is, if i have helped rate me, This video will ...

door seal ensuring that the parts are it the correct position and the two lugs are stretched over the the small spigots on the heater body. It took 4 hours to do the job but that included the learning

Question about Hotpoint Washing Machines

1 Answer

door seal has split,,,there not very pricy but a pain to fit,,,so here go's,,, open the door,,look at the door seal pull it off the back of the door and you should fine a spring wire holding it there,

Question about Candy Washing Machines

1 Answer

...door seal please. disconnect from mains not that easy first time. undo clip holding seal to cabinet. peel off seal and push inside drum remove top.i remember seal is held to tub by a giant jubilee ...

Not finding what you are looking for?
Hotpoint Aquarius WF220 Front Load Washer Logo

202 questions posted

Ask a Question

Usually answered in minutes!

Top Hotpoint Washing Machines Experts

vince

Level 3 Expert

2530 Answers

Cindy Wells

Level 3 Expert

6688 Answers

Paul Carew

Level 3 Expert

3808 Answers

Are you a Hotpoint Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...