Hotpoint Ultima WF860 Front Load Washer "filter wt960 washing" Questions

...where i would find the filter on a hotpoint WT960 please? Its most likely built into the tub and you don't need to access it.Under the agitator is usually the place on the tub they would put a ...

wt960 after all machine is not working why Hi Hitendra, F08 is a sticking heater relay. First check that connections on pressure switch are good, Check that heater connections are good.Check the board

Filter on WT960 Hi can anyone please tell me if there is a filter on the Hotpoint Ultima WT960 please a nd if so where is it Many thanks hi, in the uk the filter is behind a flap on the bottom/front ...

...the filter on a wt960 washing machine Hi andrewdoe71, Please check my tip below: ACCESS, DRAIN & CLEAN THE DRAIN PUMP FILTER Kind Regards :-) * If you found this solution helpful, please rate

...filter from a hotpoint wt960 the washing machine is starting to smell when empty. do i need to take the front panel of the machine off to take out and check the filter? Filter is located inside large ...

...wt960 keeps stopping and displays F-08, any ideas, Thanks F08 is a sticking heater relay. Check connections on pressure switch Check heater connections. Check module connections. Check pump filter is ...

my wt960 starts then flashes f18 Pump or pump filter is clogged.

...WT960 has the H2o symbol flashing it has water and no pipe kinks Make sure that the water pressure is o/k, and that the valve is fully turned on. Also check the filter in the inlet valve, you wilave ...

...filter in hotpoint wt960 washing machine I Had the same problem today, Firstly my WM was ripping up clothes then today it started to show a flashing tap on the display and it stopped working on the ...

...wt960 Washing mashine, now tripping electric. Have never been able to find and clean filter - ?is there one? I have cleaned the detergent drawer and door seals. Run hot service washes, machine still ...