Hotpoint Ultima WF860 Front Load Washer "code error f05" Questions

...error code F05 Code F05 Description: Water temperature sensor error. If during the water heating step in the wash cycle, the water temperature sensor (NTC) value is out of range, the "F05" error code ...

ERROR CODE F05, FOR KENMORE ELITE HE3 WASHER MOD.110.43862400 AFTER AFEW MINS OF RUN TIME WASHER CYLCE STOPS WATER DRAIN FROM TUB AND ERROR MESSAGE F05 DISPLAYS Click on the following link for ...

...Error code F05 The error code F05 appears. I have called assistance, they used a computer and decided to change the resistance and fluxometer, but the error code is still there. The washig machine is ...

error code: http://www.fixya.com/support/r629462-f05_error_code_whirlpool_duet_kenmore I hope you find this information helpful. I have seen this error code generated by something as simple as a loose

...error code is to do with the water inlet valve not working it will need replacing in the mean time try connecting the cold water to the hot select hot wash and see if the water flows into the machine ...

...error code comes on Water Temperature Sensor Error - Check the Water Temperature Sensor,Heating Element and Element Relay. If during the water heating step in wash cycle,the water temperature ...

error code fo5 will wash clothes but will not condition them,error code fo5 appears f05 is normally a fault cause by the pressure switch - often caused by a blockage in the exit hose of the washer. if

...error code of F05. What does this mean? Obviously I've lost the manual "F05" is a heat sensor error code. The following link explains: ...

...Error code F05 means pressure switch jammed on full. Remove lower rear cover of washer. Locate and remove large black hose fastened to bottom of drum. Remove and clean filter inside hose. Remove hose ...

Error code F05 after the start of wash cycle whirlpool GSW9100Lw1 error code F 05 Stops soon after the start of the wash cycle F05 is a water temp sensor error ,could be a bad heating element, or the ...