Hotpoint WF430 Front Load Washer "door lock light not" Questions

Door Lock Light not coming on Power light is on, wash light is on but the door lock light does not come on when the door is closed and the machine does not start. check the door peg is not loose or it

...Door Lock light Hi, Put the machine on to wash and started OK. Later went back to find it stopped with WASH light on and DOOR LOCKED light flashing. Door was closed and locked, had to unplug to ...

...SW France, The door lock light indicates there is a problem with the door lock. Either the locking solenoid or the door lock sensor is malfunctioning and requires attention. Sorry- Service call! John ...

...door lock mechanism must have jammed in open position. unless the door gets locked, the wash cycle would not start. check the electrical connection in the door lock and physically verify the lock ...

door lock light is on door is not locked and door lock light is on ,door is not locked and washer does nothing Hi, Make sure you are allowing the washer to completely finish its cycle before opening ...

...lock the door. The door lock indicator light will not light up and the door will not lock. And if the door doesn't lock then the washer won't start. I have tried unplugging it and that doesn't work ...

...door lock light is not on, and that the door lock does not seem to be working. This would keep the machine from spinning. Is your door lock light on? The door lock light does not go on. Also the door ...

...door lock is not engaging the control will not allow a cycle to start as a safety precaution, so the door lock assembly will need to be replaced if the door will not lock. You can order the new door ...

...door lock light doesn't come on normally the door catch on washing machines have a switch attached to it ,if the door is not closed properly then the switch is not operated ,stopping the door lock ...

...door lock red light indicator remained on and door locked. After a few minutes without any interaction from myself, all indicator lights began flashing again with F06 error code and the washer began ...