door stuck shut hot point wd420 Help - we're at a holiday cottage and the washing machine has eaten our clothes!!! The door is locked shut - the cycle has finished the lock has clicked the light has ...
how do I stop cycle and unlock door? Hi, Remove the top cover, and release the door catch from inside the washer, you will probably need a screwdriver or similar to do do this.You will need to replace
My door handle feels to have lost a spring. I cant feel any kind of resistance when trying to open it. Initially, the "Door locked" light was on, but even since it has gone off, the door ...
...wd420 washing machine door locked light not on Turn off the power and isolate the water supply, Move the machine in to the middle of a room - you need some space. If you then rock the washing machine ...
Hotpoint Aquarius waher dryer We have hotpoint aquarius washer dryer which is less then 2 yrs old. I put it on yesterday and went out came back the the wash light was on but the door locked light was ...
WD420 hotpoint door will not open ? In some cases switching off and back on again solves it. Otherwise try to run Rinse & Spin cycle again, and if after cycle door will stay locked you'll need to ...
Question about Hotpoint Washing Machines
WD420 shows that the door is locked. So i can't open it........ If the door will not open normally, then the only solution is to remove the top cover, and force the door open from inside the washer at
Question about Hotpoint Washing Machines
Washer/dryer has completed two cycles and the door won't open The door lock mechanism is stuck. You will need to get access to the back of the machine in order to undo the screws holding the top of ...
Question about Hotpoint Washing Machines
Hotpoint washer dryer wd420 it powers up and u ere the door lock but theres no lights on and if u press any buttons don't work new motor brushes needed lindsey, 90% sure thats your problem.
door won't open if you can still see water in the machine, check the drain hose. If there is no blockage or kink, try to drain machine by lowering the drain hose below the machine level. Once the ...
907 questions posted
Usually answered in minutes!
886 Questions
541 Questions
485 Questions
500 Questions
151 Questions