...and removed it but the metal center won't budge at all. I've used pulley after spraying with WD40. It looks to me that it has rusted and has fused its self on. Any ideas on how to remove. ...
Question about Hotpoint Washing Machines
...the machine to be sure that I got the right squeak. The soap dispenser was in the way to get some WD40 to the spring. I would have to remove the front panel to get at the spring. I didn't like that ...
...the main circuit board. unplug all the wires going to the motor harness Clean all contacts with WD40 and reposition the connectors back on the boards and plug the machine in ....it should now
...NO WASH OR SPIN CYCLE BUT WILL RINCE IS IT THE DOOR INTERLOCK SYSTEM OR WHAT PLEASE HELP. Try some WD40 on the door
Washer Start/Pause button is Falshing and won't start The Washer won't start and door won't lock. Becky from Kentucky Try some WD40 on the door lock. The washer won't start if the door doesn't lock.
.what can i do? sounds like the on/off button is faulty. It may need replacing, but try a squirt of WD40 on the switch WITH THE POWER TURNED OFF!! COS WD40 IS COMBUSTABLE But like my dear old Dad said
Question about Kenmore Washing Machines
...the contacts in the timer has a problem. Unplug washer. Remove the back of the washer and spray WD40 in the timer. Put towels around and under to to collect excess runoff. Rrotate washer dial 25 ...
Question about Beko Washing Machines
...machine had a door closing and opening problem, i thought i fixed it with a squirt of good old wd40 door now operates fine, but washing machine just hums and clicks now. o gosh what have idon it ...
Question about Hoover Washing Machines
...and over the contacts to circuit board. It's ok.. Disolves and dries really quick.... I used the wd40 one me.. NOW NORMAL WD40!!) then put know back on and give it a good turn in both directions. ...
907 questions posted
Usually answered in minutes!
886 Questions
541 Questions
485 Questions
500 Questions
151 Questions