Hotpoint Aquarius WD640 Front Load Washer/Dryer "holds water under drum" Questions

...water pours like a waterfall from out from under the detergent dispenser.... there must be something holding the water up after it goes through the detergent bin. If we let it sit for a while it goes ...

water that will come out, now remove the clip that holds it onto the drum. the filter is inside the hose.Disconect from the mains power before commencing any work.For Hotpoint, Creda and Indesit error

...under the pump to catch any water that will come out (rather than soak your floor) undo the clip holding the hose onto the pump and remove it. You may need to remove the pump but you could find a ...

...water pushes up under the top lastic rim and comes up through the drain holes of the ''add chlorine'' tray and slops and spills down the outside of the drum and runs out from under the machine. While ...

...under the sump to catch any remaining water when it is removed. Undo the retaining clip around the sump hose and disengage it from the container, the filter is inside the hose and can be taken out to ...

...Water leaking out from under washing machine Ariston Margherita 2000 ab95 washing machine. Problem : Water leaking out from under washing machine. How do i open up the machine to check for leaks? ...

...large enough to fit under so just let water just flow away. Dry every thing off. make sure you don't loose ping pong ball in filter and make sure filter is clear. refitting is reverse of ...

under side to try to pull it off to no avail. I was lifting the whole machine off the floor. Am I missing something, a keeper or what? It is a model.GHWP1000M1WN . Appx year 2012 it might spin off try

...water level switch * Inspect the motor coupler * Inspect the drive belt (belt drive only) * Inspect under the washer for soot (clutch) * Test the motor * Inspect the pulley * Test the transmission In ...

...water after each spin sycle.I've tried to locate the source but looking under one of these machines isn't easy. I've made sure the machine is stable and I don't use too much powder. Any suggestions? ...