Hotpoint Aquarius WD640 Front Load Washer/Dryer "fault f01" Questions

Ad

...machine will not start Fault Code F01 machine will not start Fault code F01 indicates a problem with the motor triac. Check all connections to and from the motor, the control module, and the motor ...

Ad

Question about Hotpoint Washing Machines

1 Answer

...Fault F01 How to clear Hotpoint dishwasher FDYF 11011p Fault F01 Certainly! Here's a concise response for the forum discussion: To clear the Hotpoint dishwasher FDYF 11011p Fault F01, you can follow ...

Ad

Question about Washing Machines

2 Answers

...F01 means defective triac or defective motor. On a Fagor washing machine it means: Not filled in time allowed (8 Minutes) - washing machine does not fill Check mains water pressure Check inlet hoses ...

Question about Indesit Washing Machines

1 Answer

...fault code f01 on drying The initial fault was a blown heating element, which was replaced, but that brought to light a welded relay on the control board. I have replaced that too, which allows the ...

I have a Hotpoint ultima wt960 with f01 error can I fit the part Hi f01 means motor fault. remove motor and check the brushes. if ok then fault could either be motor or pcb which is faulty. regards

...FAULT F01 ON MY WASHING MACHINE WF860 STARTS TO FILL UP THEN STOPS AND BEEPS THEN SHOWS F01 F01 indicates a short circuit motor triac, this is part of the motor speed control, either in the motor, or ...

Question about Bosch Washing Machines

1 Answer

...1400 s express fault F01 and F02 whats the problem here? F01 Door not closed properly. F02 Tap not turne on, Inlet hose kinked or pinched, Filter blocked in water inlet hose, Water pressure to

Question about Hotpoint Washing Machines

1 Answer

wf860 washer dryer - dryer has no heat and displays f01 Hi, Fault code F01 indicates a problem with the motor triac.Check all connections to and from the motor, the control module, and the motor plug

Question about Hotpoint Washing Machines

1 Answer

error f01 flashing on machine F01 on a Washer Dryer means you have a motor fault. I suggest check the motor and associated wiring. You may just have a broken wire. Hope this helps.

Question about Hotpoint Washing Machines

1 Answer

...F01 is an Electronic circuit board fault I recommend you disconnect (unplug) the appliance from the mains supply for a minimum of 2 minutes. Reconnect supply and wait 30 seconds and try starting the ...

Not finding what you are looking for?
Hotpoint Aquarius WD640 Front Load Washer/Dryer Logo

907 questions posted

Ask a Question

Usually answered in minutes!

Top Hotpoint Washing Machines Experts

vince

Level 3 Expert

2530 Answers

Cindy Wells

Level 3 Expert

6688 Answers

Paul Carew

Level 3 Expert

3808 Answers

Are you a Hotpoint Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...