...Heater, remove wires from element, then measure resistance across element. A good element could read anywhere from 9 K Ohms to 13 K Ohms depending on the voltage of the element. A bad resistance ...
...Heater Element Replacement Hi Guys - How do I replace the 2 heater elements in a Miele WS5426 Commercial washing machine. They appear to be held with spring (star) clips as opposed to with a single ...
...heater element how do you replace the heater element do you have to take the drum out no need to take drum out. heater is held by one 10mm nut in the middle of the heater. when tightened, this nut ...
Question about Hotpoint Washing Machines
...Heater Element in Hotpoint WF210G Hi there, Had a problem with the fuse tripping whenever the washing machine was on (particularly when power went to heater element). On investigation I saw the ...
...heater element terminals with the wires removed..........open circuit!!, I'm guessing the element needs replacing! RichB You are definitely right. The heating element needs replacement. So, go
...heater element.Remove back panel then remove heater element(two prongs with nut in centre)you will be able to see signs of damage if so that will have to be replaced. £20 - £30.00p. Your ...
...heater element. Locate heater,remove connections to heater and try without the heater. If it still blows, then could be a faulty motor, unplug motro, and try again. Hope this helps. This video will ...
...heater element but on the bottom of the post he updated it and put that it was the heater censor which is attached to the element, there was a picture and guide to removing the element. so before i ...
...ELEMENT NOW CATCHING ON DRUM You will have to remove front panel of washer , and replace the heater, and heater retaining plate, which is the piece that has come off. Please rate my solution. Thanks. ...
...heater element. I am replacing the rear drum and need to change the heater element over from the old to the new. I can't get the element out. Unscrew the center nut completely, lever the metal plate ...
183 questions posted
Usually answered in minutes!
886 Questions
666 Questions
541 Questions
485 Questions
500 Questions
