Question about Sony Handycam Video Cameras
...camcorder? Pinch roller fell out and lost I had a similar problem that happened to my old Betamax camcorder. The only way that the pinch roller can be replaced is the whole cassette mechanism had to ...
that snaps in the top of the pinch roller? # 763 is different thing, a roller fixed under pinch lever pin for smooth run. # 760 is complete pinch roller assembly including snaps on top of pinch roller
...pinch roller for this. I put the pinch roller back where you pointed out and everything worked fine. The problem is the pinch roller won't stay on. I wanted to see what is missing so I can try to ...
...shows where this goes so I can put it back on. Please advise. Below is an exploded view of camcorder mechanism and Pinch Roller is marked with red line. Hope this will help you to install it
Pinch Roller Does this just press back on? there is a small plastic roller that holds pinch roller as shown in below image...
Open tape compartment and check right side guide, you will see bit thick black pinch roller along with right guide, if its not there, find it inside camcorder by taking it apart and install it. Thanks
Cassette doesn't exit, nor it opens the casette ejector. I think pinch roller lock is broken,its not moving cassette.Please check it pinch roller is inside or not
...trv27 It probably fail off,which is very common problem, roller should be still inside of the camcorder. You also have to look for small white, lake tubing part that hold pinch roller on the
pinch roller problem.The pinch roller rubs against the capstan motor to pull out of the cassette .This pinch roller seems to fall completely or loose causing the error.The other possiblity is that the
88 questions posted
Usually answered in minutes!
310 Questions
243 Questions
242 Questions
159 Questions
150 Questions