Nordic Track Nordictrack Exp 1000i Treadmill Rear Roller For Model Number Nttl09900 "speed post" Questions

Treadmill is not calibrated with the set speed have to set speed higher that monitor treadmill speed is slower than posted speed If this does not help call Treadmill Doctor at 800-750-4766 ext ...

The speed control knob stop working on my vitamaster 1700, the screen with mileage, speed, & calories burned works, but when I turn the speed knob nothing happens. What could possibly be the problem??

The treadmill will not come off of 10 for the speed. Runs fast at 10 all the time even after I turn it off, can not change the speed. First of all check the Speed sensor and its position. If its ok ...

speeds are randomly speeding up and down. rpm guage is in sync with fluctuations. this is a Weslo cadence-40. If you wish to get some details; check the site linked here. Pull up older posts. ...

I have xystos X1 treadmill that only goes full speed. The speed sensor is clean. What can I do next The motor control board is faulty If you wish to get some details; check the site linked here. Pull ...

...will stop. I can start it manually, but it stops again after 1 or 2 minutes. You have to check the speed sensor potion. Try to align the speed sensor or check is there is any dust accumulate on

...old. Shortly before it quit, there was a "rubbing sound" from the belt. You have to check the Speed sensor of the tread. IF the speed senor is faulty this problem can occur. Normally in all ...

Need a wiring diagram Also need a wiring diagram for a variable speed speed switch for this motor If you wish to get some details; check the site linked here. Pull up older posts. Surf the site with ...

Error Code E1 Check the speed sensor. You have to clean the speed sensor and should position it properly. You will find the speed senor near motor pulley. If you wish to get some details; check the ...

I have a Horizon Ultra 200 tread mill that has E 105 and speed flashing and it will not reset or start . can you help? Chekc the speed sensor. If you wish to get some details; check the site linked ...