...stuck on maximum elevation and shows an error code e7. Phil, I have had the same problem today. did you solved the problem already? The riser on my Tunturi T20 is stuck on maximum elevation and shows ...
...Elevation stuck and wont come down Sounds like there is either a malfunctioning button on the upper console, or a shorted triac driving the elevation motor(or other elevation control device) Can you ...
Question about Proform Exercise & Fitness
...stuck in fastest speed. also will not turn off unless i unplug from the wall. 1) LUBe the elevation motor, in shaft and gear 2) adjust the small POTentiomenter for to liberate the elevation motor 3) ...
...stuck at its highest elevation. Is there a solution to bringing it back down to normal elevation. I was given a short excerpt from the manual by the manufacturer to reset the computer but it didn't ...
nordictrack cx 1055 resistance stuck Everything was working fine yesterday, then suddenly the resistance was stuck at the highest level. Need a new elevation motor 1-888-308-9620
...stuck in the top elevation position and will not run. I get a "Auto Syncing" message, but the machine will not run. Have tried unplugging etc, but it will not exit the mode that it is in. How can I ...
Question about Tunturi Exercise & Fitness
...stuck in the incline position: thanks Tim for the response. I'd love to manually lower it, but there is no flat head screw on any metal-encased fan. The only fan belongs to the motor of the ...
...stuck at a high elevation but the panel says 0 elevation. The big problem is a squeak in the electric motor that speeds up when the motor speeds up. Can this motor be oiled? Do you think it is the ...
Question about Proform Exercise & Fitness
...Track does not go to start with key inserted Proform 765 EKG - insert the safety key and the machine does not reset to start. I pulled the safety switch out, and the elevation is stuck on 10 ...
stuck at full12 degrees and won't respond 1)signal false coming console or display board2) main motor controller is faulty.3)Pot attached of the elevation motor ,need adjustment4) geared slip from
3 questions posted
Usually answered in minutes!
346 Questions
56 Questions
48 Questions
44 Questions