Proform 6.0 RT Treadmill "incline working" Questions

incline does not work but incline motor runs for 3 to5 seconds proform415ct Incline motor runs a few seconds then shuts off incline does not move everything else works if the motor tries to work but ...

...and I press the incline up button (max of 15% incline) I hear the motor for the incline function working but the treadmill is not inclining. Any help would be great. Thanks for the response!

...working or is it because it is for a treadmill and not the incline trainer? Thanks. Dawn Technically, the Incline Trainer and the treadmill are two different type of machines. The incline trainer ...

...incline had stopped working but I was still able to use it. Now this Error appears and it will not work. Can anyone give advised as to how to fix it please. ERR7 Definition: The display board main IC ...

...the incline not working. Please help. Thanks in advance Sue Because you are hearing the lift motor making a noise, it sounds like the gears in the motor are bad. The fix is to replace the lift

...incline feature stopped working. I pulled off the cover and can measure voltages, but don't know what to check. Any ideas? ProForm Treadmills have a reset procedure for the incline function. With the ...

treadmill incline not work I bought a Proform 590T less than two months ago and now the incline does not work. It works perfectly fine 2 days ago, but now the incline does not move at all, neither up ...

...incline stopped working. I was in the midst of going from flat incline to full and then back down again when it stopped. The incline numbers now register on the display, but it doesn’t move. Try to ...

...working. any other ideas how to fix the incline. does it work at all?if not there are connections on the control board that may have been left off. remove the motor hood and chech the incline motor. ...

My console does not allow me to change the incline, speed, etc. The control panel does not acknowledge the buttons pushed. I've turned it off and on. my treadmill is doing the same thing. the only ...