Sportcraft Tx5.0 Tx 5.0 Rc Treadmill Motor Speed Controller Board Fh-3545c-pw-n "tight treadmill deck" Questions

treadmill belt either too tight or too loose. When it's too tight it wont go and when it's loosened like it says to do, it makes a strange noise. When we got the treadmill put together it said

tight it.8)Lubricates the treadmill between deck vs walk belt, this can cause to shut down the treadmill, since the complex electronic is designed for to protect the electronic components.9) Lubricate

...treadmill that is known to have a good running belt and deck. Replace the belt and/or deck if necessary. Don't forget, some units have a double sided deck which means it may be flipped over rather ...

...treadmill and on the screen it says manual and the belt wont go round when its plugged in any ideas why? 1) adjust the Reed Switch , see the diagram clean it, tight the wires connector very well.2) ...

treadmill wont decrease. Help please! 1) tight the flexible cord from keypanel vs display board2)tight the display board vs lower board(main motor board)3)Test the main motor board(faulty to worn deck

...treadmill that is known to have a good running belt and deck. Replace the belt and/or deck if necessary. Don't forget, some units have a double sided deck which means it may be flipped over rather ...

...tight even the safety key but it still stops. When I am using the treadmill walking it does not stop with me. When is stops with him, he gets and Error 1 message. I looked in the owners manual and ...

my console doesn't work at all on weslo lx15 adjust the REED switch tight the connector, and clean it. see the diagram attached. 2) tight the ribbon cable and clean it inside the display board. tight ...

...deck lights just blink and no buttons work adjust the REED switch, see the diagram. clean it+test for open or faulty+tight the connector very well. If the problem persist try to RUN the software ...

...tight a little the drive belt, and test and replace the belt if necessary. 2) test the bearing motor and repair. 3) LUBE the deck belt and rollers bearing and replace if necessary maybe you have a ...