Miele 300 Front Load Washer "transport bolts" Questions

...transport or shipping" bolts are located at the rear panel of the washer. There are four of these bolts used to support the suspension system during the transport to prevent damage to the washer. ...

bolts if next time I want to transport the washer. One of the customer service suggested that to put weight into the drum during transportation, ie phone books. But this is not the case. AS the manual

Transport bolts left in on first spin cycle very briefly I left the transport bolts in our brand new LG washing machine and now i am afraid that it is damaged. It started jumping around so i turned it

...are the transport bolts. Remove the top cover and look down the back so you can see the part that holds the transport bolt.. Use a set of pliers and hold the part while you screw the safety bolt

...transport bolts for moving washer Kenmore Elite He4t front loading washer. Must reinstall the orange plastic transport bolts. Luckily I found them! There are two short and two long, I have no idea ...

...transport bolts to move either? Also what capacity is the washer and dryer The transport bolts are required to be installed before transporting the machines. This is to support the suspension system ...

Does this model have 3 x locking bolts for stablising drum or are they transporter bolts?? I Think Transport bolts...

transport bolts can you damage your washing machine if you use it before you remove the tranport bolts Yes actually the outer tub can't "bounce" around on the springs and shocks so the transport bolt ...

...transport bolts We are trying to install the transport bolts an the screw is not lining up with the hole. Whats wrong?????!! There are also 2 different kinds of orange bolts. yes there is you best to ...

...bottom two holes in rear. if they are transit bolts they do is it a new machine or has it just been transported if you cannot move the drum from side to side take them out only used for ...