...-drum /cleaning section, and toner hopper. Replace drum and cleaning blade, clean PCR. Remove Mag roller. clean out toner hopper, clean mag roller, replace doctor blade, fill with toner, and ...
Question about HP LaserJet Office Equipment & Supplies
...1500 prints. refilled yesterday but very light print, what is the reason? sir, if u r getting light print than u replace Drum,if no than wiper,if no than doctor blade.if no than u use 88a toner
Question about HP LaserJet Office Equipment & Supplies
...doctor blade spacing issue, two, its waste hopper is full. I have seen alot of CB-530 Carts have a spacing issue, even when new. Either take the cart to a refilling facility, return it to hp, or take ...
...doctor blade, wiper blade, pcr rollers etc.. and check weather your cartridge is getting leaked, if so replace a new one.Some times transfer roller and pressure roller and scanner assembly insdie the ...
Question about HP LaserJet Office Equipment & Supplies
...amp; doctor blade thoroughly POSSIBLE LITE STRUCK DRUM OR CLEANING BLADE STUCK TO DRUM FROM LACK OF USE /HEAT ETC . TRY ANOTHER TONER. POSSIBLE FUSER IF IT GOT OVERHEATED. OPEN THE BACK AND CHECK ...
doctor Blade ( the part that sets the magnetic brush height) alternatively if the transfer belt has been 'clocked' then the ridges in the surface are too deep for the cleaner blades to have effect and
...Is tis a problem with toner cartridge, or dirt inside printer, or drum needs to be replaced (I don't even know if this is an option)? the doctor blade and wiper blade in the toner cart are
doctor blade, bad calibrated. Use Original cartridges? See This: The amount of background toner shading becomes unacceptable. 1.The media might not meet HP specifications. Use a different paper with a
...either a poorly adjusted doctor blade in the cartridge, or if it is an HP cart, it has a prematurely full waste bin and is transferring waste toner to the page. Either way, replace the
Question about HP LaserJet Office Equipment & Supplies
blade and doctor blade or buy an OEM cartridge. If the printer has been heavily used it could also be that the fuser is on the way out. Hope it helps - i see hundreds of these types of printing issues
1,256 questions posted
Usually answered in minutes!
1,429 Questions
724 Questions
663 Questions
593 Questions
492 Questions