...Paper feed problem are usually caused by worn feed rollers and separation pads. If you printer can not pickup the paper or pulls more than one sheet into the printer at a time then the rollers and ...
Question about HP LaserJet Office Equipment & Supplies
...paper feed rollers, which are in the paper tray at the bottom. the HP model is Q5998A, and they'll run you around $275 for an HP branded one. It has complete instructions on how to replace the parts ...
Question about HP LaserJet Office Equipment & Supplies
paper to feed it into the printer so the printer thinks there is a jam. If you keep getting the jam error but no paper jam can be found and the printer is not pulling paper in then you need to replace
...paper is fresh, it could only be the feed roller having trouble gripping the paper or the fuser not turning/stuffed. Feed Kit, I have my doubts as to this being your problem Maintenance Kit Fixes 98% ...
Question about HP LaserJet Office Equipment & Supplies
...paper Feed related error normally caused by dirty or worn paper feed tyres if you are getting this error whilst feeding from the paper tray at the bottom of the printer stack a few sheets on the ...
...PAPER FEED 1, PAPER LATE JAM. THERE IS NO JAM AND IT TAKES MULTIPLE RESTARTS TO GET IT PRINTING AGAIN. Make sure the paper tray guides are set against the paper more likely to be the back guide not ...
...paper and thinks that there was a jam. Try using the manual feed tray. If that works, pull out tray 2 and clean the feed roller . Is this printer up to date on its maintenance? The feed roller might ...
...feed. I've tried to see if there's any paper jam but none is found. Is there some guide that could be misaligned that I need to fix or readjust. Needs feed roller replaced, you can see it when you ...
Question about HP LaserJet Office Equipment & Supplies
...paper is pushed. Even then, feeding doesn't work well. Can you help? Generally, you could clean the document feed rollers with WD-40, or a platen cleaner, but better yet, you should replace the pads ...
paper pick-up problem printer fails to pick up paper from tray 2 and reports paper jam. the feed tyre kit needs to be replaced, these tyres usually come in the maintenance kit
143 questions posted
Usually answered in minutes!
1,429 Questions
1,001 Questions
724 Questions
663 Questions
593 Questions
