Question about HP Office Equipment & Supplies
...clear the reoccuring HP 2610 paper jam error message: The trick is to initiate a print head alignment sequence. * Open the printer door and press cancel on printer to get the print cartridges to move ...
Question about HP Office Equipment & Supplies
...clear the jam: Gently pull any jammed paper out of the output tray or sheet feeder. If the paper is stuck inside, turn off the Epson Stylus CX. Open the scanner, remove the jammed paper and torn ...
...clear the jam: Gently pull any jammed paper out of the output tray or sheet feeder. If the paper is stuck inside, turn off the Epson Stylus CX. Open the scanner, remove the jammed paper and torn ...
...clear carriage jam, and then pres OK to continue We opened door and even found paper from backside door. Everything looks clear now. No more paper in printer that we can see. What next? after closing ...
...clear carriage jam and the press ok Hi friend, What probably happened is that paper jam caused the carraige alignment sensor to get out of place or to get covered, moved, etc and the printer doesn't ...
...close the cover, plug in the printer and turn it back on. After doing so, the error went away and my printer is back to normal. First make sure everything is clear inside and nothing was put in your ...
Question about HP Office Equipment & Supplies
...clear view of the printer?s moving parts to identify anything that may be blocking or impeding free movement of the carriage. The carriage should move to the center of the printer. Remove the ink ...
Clear any obstructions found. You might have to reach through the output paper tray to access the carriage. 5. Close the cartridge access door and reconnect the power cord to the product. 6. Press the
Question about HP Office Equipment & Supplies
...clear protective tapeCAUTION: Do not try to remove the copper electrical strip. Look at the number on the cartridge label and make sure it is compatible with the product. Compatible cartridges are ...
clear plastic and can be difficult to see without direct lighting running parallel to metallic rod. e. Close the printer and try again to print. 4. Repositioning the Encoder strip. a. Remove the power
640 questions posted
Usually answered in minutes!
2,817 Questions
2,162 Questions
1,869 Questions
1,584 Questions
1,504 Questions
