HP LaserJet 2840 All-In-One Printer "adf cover open ok" Questions

Ad

Question about HP LaserJet Office Equipment & Supplies

2 Answers

...ADF cover, disconnect the ground strap on the right side of the cover, and slide the cover slightly to the right until it is unhinged. The cover housing the scanner glass can be lifted off after ...

Ad

Question about HP LaserJet Office Equipment & Supplies

1 Answer

ADF, then open the Document Feeder Cover. 4. Raise the Paper Release Lever, then remove the jammed page from under the roller to the Document Feeder Cver side. 5. Pull out the jammed document from the

Ad

Question about HP Office Equipment & Supplies

1 Answer

ADF cover NOTE: Remove all originals from the ADF tray before you open the ADF cover. 1. Open the ADF cover, and then close it again. 2. Press the OK button. * If still a problem, go to the next step.

Question about HP LaserJet Office Equipment & Supplies

2 Answers

...ADF, then open the Feeder Cover. Remove the jammed page from under the roller to the Feeder Cover side. Pull out the jammed document from the ADF. If the document cannot be easily pulled out, proceed ...

Question about HP LaserJet Office Equipment & Supplies

1 Answer

...for detecting load paper in the ADF section. Check if there is something that keeping it stuck in that position. You will need to open the cover of the ADF section to do this. Hope it

Question about HP LaserJet Office Equipment & Supplies

2 Answers

...ADF folder and wrapped around the rollers when the cover is opened Most probably the rollers are sticky. Try cleaning the rollers with fibre cloth soaked & squeezed dry. Use a blower to clear any ...

Question about HP LaserJet Office Equipment & Supplies

3 Answers

...ADF. Close the feeder cover and press OK to eject document. I don't want to eject the document -- I want to print it! Please advise. Canon Pixma MX330, ADF error, Code : 2,103,0 Here's what I found. ...

Question about HP LaserJet Office Equipment & Supplies

1 Answer

cover of the ADF and look for a rectangular hole with a lever stuck down. That lever should only go down when a paper is placed in the feeder, and sometimes they get stuck in the down position. A bent

Question about Canon Office Equipment & Supplies

3 Answers

...ADF, Close feeder cover and press OK. Rebooting does nothing...the printer remains in this repeating loop and there is not a thing stuck or inside it. Hello, The sensor may be dirty even if it looks ...

Question about HP LaserJet Office Equipment & Supplies

8 Answers

adf feed area. I found a band aid stuck in the underside of the cover when I lifted it up. Pulled it out and the message went away. As far as the band aid, my roomate is a moron. I don't know what she

Not finding what you are looking for?
HP LaserJet 2840 All-In-One Printer Logo

443 questions posted

Ask a Question

Usually answered in minutes!

Top HP Office Equipment & Supplies Experts

Cindy Wells

Level 3 Expert

6688 Answers

k24674

Level 3 Expert

8093 Answers

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

Are you a HP Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...