jam in output bin How do I clear a jam in the output bin? When I opened the back top, I can see the paper but can't get to it. Try taking all of the paper out of the paper tray and try to pull it from
jam in output bin I printed a 65 pg doc, and it piled up in the output bin, jamming 2 pages: one outside in the output bin and one inside feeding into the output bin. I carefully removed both. ...
output bin at the top of the printer and the message won't go away, either the sensor is bad or the actuator is stuck in the up position. Look at the top of the printer at the rear right of the fuser.
jam issue; it prints half and then gets jammed halfway; opening and closing the front panel sends the paper out but upper half of the paper prints ok but lower half shows low ink type print. The paper
Question about HP OfficeJet Office Equipment & Supplies
...jam. Take out all loose paper/media from all trays and output bin. Remove the cartridge and then ease the paper out. Then reinstall the cartridge and close all doors before returning the paper to the ...
...output bin is not full and just keep printing. Thanks to the person who suggested taping a quarter on to the flap to hold it down. Here's what it looks like. Not pretty, but it works. There is a 2nd ...
Question about HP OfficeJet Office Equipment & Supplies
...output bin to allow more paper to exit. This flag sometimes sticks and a quick check is to make sure that nothing has become jammed where the paper exits the printer. Most common cause is the flag ...
898 questions posted
Usually answered in minutes!
2,817 Questions
1,584 Questions
1,223 Questions
991 Questions
857 Questions