paper path is cleared but no change. 13.20.00 JAM INSIDE Paper has not moved past a certain paper sensor. can be one of the following locations. ? TRAY 2 Remove the tray, and then check the paper path
...paper path what is this massage and give me solution. Thank you contacting FixYa for your printer inquiry. This error is associated with either a sheet of paper blocking the paper path or a partial ...
Question about HP LaserJet Office Equipment & Supplies
...paper path for other pieces of media in the path. 2. Open and close the top cover to clear the message. 3. Check sensors and flags in the paper path for proper operation. 3.0 Paper Jam [Location] A ...
...stating that there is a paper jam, but there is not a paper jam! What should I be looking for? Paper path sensors dusty, clean all paper path sensors as well as verify sensor flags &
...paper path for other pieces of media in the path. 2. Open and close the top cover to clear the message. 3. Check sensors and flags in the paper path for proper operation. For message 3.0 PAPER JAM ...
Question about HP LaserJet Office Equipment & Supplies
...location. Check the entire paper path for other pieces of media in the path. 2. Open and close the top cover to clear the message. 3. Check sensors and flags in the paper path for proper
paper path. i have taken out every carteridge that I possibly can and opened every door that can possibly open and there is NO paper stuck in that printer. No wrinkled, or crinkled or smushed up paper
...perform a paper path test using a duplexer. If issue is still not resolved then please remove the duplexer unit and re seat it. After re seating the duplexer your issue will be resolved. Daniel ...
...paper path is in good condition..I noticed that the tray is not lifting and i even replaced Lifting motor..please help me.. In DIAGNOSTICS menu select "paper path sensor test" Pay attention to E, it ...
...paper path must be checked for any pieces of paper. To stop the message, open and close the top most cover of the printer. Lastly, verify the flags and the sensors. If the problem persists, the cause ...
1,644 questions posted
Usually answered in minutes!
1,001 Questions
724 Questions
663 Questions
593 Questions
492 Questions