Question about HP LaserJet Office Equipment & Supplies
fuser assembly To remove paper jam. Just remove the toner cartridge and pullout jammed paper. If still coming paper jammed error message. Switch of the printer and the printer will roll over the paper
Question about HP LaserJet Office Equipment & Supplies
...was no jam. It will not let me print at all until I clear this nonexistant jam. pull your fuser out and you will find the jam and reason for the noise. it is pulled from the rear 2 covers and 2 ...
Question about HP LaserJet Office Equipment & Supplies
...jam below the toner cartridge before it reaches the fuser. Remove the toner cartridge carefully and verify if the smudges occur. This would eliminate the fuser. If the print quality is fine, then you ...
...Jam inside top cover the printer appeares this note :- remove print cartridge This is a common issue and most times a bear to repair. There is a sensor flag mounted on the paper feed assembly behind ...
...jam in the paper path. i have taken out every carteridge that I possibly can and opened every door that can possibly open and there is NO paper stuck in that printer. No wrinkled, or crinkled or ...
...Jam in output bin." I powered down. I reset the fuser lever inside. I took out the cartridges to see if anything was jammed behind them. I can't finsd any paper jammed any place, and can't get rid of ...
...JAM INSIDE Paper has not moved past a certain paper sensor. can be one of the following locations. ? TRAY 2 Remove the tray, and then check the paper path for obstructions. Perform a manual sensor ...
Question about HP LaserJet Office Equipment & Supplies
...jam- take out the imaging unit and check to see if there is any paper inside the printer, if so remove it, put the imaging unit back in and close the lid. -Lastly there could be something going on ...
...JAM INSIDE TOP COVER AREA and more specific: The pre-feed sensor, the top-of-page sensor, or the fuser-delivery Those are the points where some paper pieces or even dust can be stuck. Hope it helped, ...
Question about HP LaserJet Office Equipment & Supplies
...jam inside top cover' on startup Have checked and removed registration sensor (tof) and assembly and have checked fuser entry sensor both look OK. client reported 2 x sheets of paper under cartridge ...
1,644 questions posted
Usually answered in minutes!
1,001 Questions
724 Questions
663 Questions
593 Questions
492 Questions