Neff U1421 Double circotherm Electric Oven "element terminal wires" Questions

...element. If this is correct put the 2 neutral wires, in any order, on terminals 1 and 2 and the active terminals on 3 and 4. This should work. You just have to check the correct element comes on when ...

...terminal, which is usally located on the base of the element fixing bracket. so do not get the wires mixed up, because if you are putting the earth wire on the wrong terminal, it will blow. Hope this ...

...element terminal 4 prong plus ground (--=--) connections for 240/120 connection unplug power. open oven door. unod screws holding element in place. pull straight to you. unplug and remember color cod ...

Maytag Wall Oven MEW5530DDB, elements not getting fully red hot, elements continuity is good, replaced heating sensor, elements not getting RED hot as they use to be. Maytag Wall Oven MEW5530DDB, ...

hooking up new bake element I need to screw the terminals back on my replacement bake element in but I don't know which side of the element the red wire and yellow wire connect to. I see that one side

...wires from the element terminals. Place the wires on the replacement element. Reinsert the terminals into the holes and replace the mounting screws. Turn the power back on and bake me a dozen

element has two terminals and a ground on the plate screwed to the oven. One red wire comes in from the controls and goes to the one terminal and the other is a green wire from the other terminal back

...terminal on the element. Touch the other meter lead to the other terminal. If you get NO reading the element is bad. A new element will correct your problem. If the element reads as good you have a ...

...and fan comes on but there is not heat? The grill seems to be working? On this setting the fan and element get power at the same time. If the fan is working it is fairly safe to say that the element ...

...element should be 29 ohms. 1067 ohms means there a very slight circuit but when power is applied it simply will not work. Just try that test again with the wires off the elements. It should not be ...