Question about Lasko Air Purifiers
Lasko Tower Fan stopped working but Speed switch has power on all but one cable, How to find the issue? The Fan was working fine. Suddenly the Power button started to have issues, sometimes you have ...
...power from the switch, if so then the motor is bad, usually the bearings go out on the motors before the wiring does. Unless your motor was on medium and was stopped for a long period and overheated ...
fan blade barely rotates when turned on high. there may be a problem with fan motor,but i believe your problem may be the rotory switch that controlls voltage to fan motor,to check this pull knobs off
Question about Oreck Air Purifiers
Will not operate, no reaction when power button pressed. All panels properly locked. This unit has had minimal use and instructions have been followed "to the letter". first off does the light come on
I have a Trion Max 5 1400. when the air is flowing past, I turn on the power switch and both lights come on, then go right off. We have had the unit for awhile, and have had the power module repaired ...
...switches for broken wiring or maybe a switch is misaligned. This requires some disassembly if your not sure of yourself there three levers you can choose from when attacking this unit A,B,&C. It ...
Sharper image ionic breeze air cleaner I bought a pair of ionic breeze air cleaners in 2002 and both has stopped working at about the same time. There appears to be no power when turned on. I opened ...
Question about Honeywell Air Purifiers
...WIRING. AND WILL LOOK BURNT. MAKE SURE YOU SEE NO LOSE WIRES ... SOME TIMES THE SPARK-PLUG LOOKING WIRE GOING TO THE CELL(S) CAN BURN OFF ITS CONNECTOR. YOU CAN CHECK THE DOOR SAFETY SWITCH TO MAKE ...
Honeywell Enviracaire Elite 300 problem. Light is not on. Seems like no power to system. No snapping or noises. No obvious bent fins or broken wires If it was wired to the return air it will have a ...
Question about Alpine Air Air Purifiers
Bought a used Alpine Air xl15. When I plug it in there is no power light. Switch on back clicks when i push it. Shouldn't there at least be a power light on? Found that the fuse cap/plug is missing. ...
6 questions posted
Usually answered in minutes!
11 Questions
12 Questions