Question about Panasonic Air Purifiers
...around the brush roll, cleaned it and checked the belt which looked fine. I closed it up and turned on the vacuum but still no spin. The motor sounds fine. Please help! Possible that you did ...
...turn on the 03 the sparks start snapping down the sides of plates Disconnect the power and give it a good cleaning with a SOFT BRISTLE PAINT BRUSH. Outside is best. Blow it out gently with canned air ...
...turn on the sanitizer on the machine, it turns itself off (the whole machine). Does it need to be cleaned?? What type of solution do I clean the boards in?? Remove the plaques and using an old tooth ...
...turn on? A string was caught in the roller brush. I removed it, but the vacuum still won't turn on. The light turns red and stays illuminated. Check and see if there is a reset button for the vacuum ...
...also dip in a solution of CLR mixed with water,then wip it dry. dont forget to clean the spicket by turning it counter clockwise and using a q-tip or baby bottle nipple brush . do this under running ...
My eureka vacuum stopped working. Need more information. Does the motor run, does the brush turn, does it have suction?
...turn it on to test it it comes off...the brush doesn't spin...Am I missing a part?? Cathy The brush roller only sits one way and must b free rotating not jammed up if roller is tight to turn ...
brush before putting back in also check the brushes bearing to make sure it moves easy as a failed bearing do to carpet string etc can burn the belt, any belt that has been burnt in this way should be
...got a sock stuck in the brush. I check the belt and it is fine. You can also feel the suction coming thru but, the roller brush does not turn automatically nor do the lights turn on RJ ROY IS ...
...when I manually turn the belt. There is no noise when manually turning roller brush. Are there instructions to take the vacuum apart to get to this part? I an't figure out how to get to it. ...
28 questions posted
Usually answered in minutes!
11 Questions
