My rainbow vacuum is the vacuum and air purifier in one. The vacuum/high speed works perfectly, but when I try to turn it on the lower setting to just clean the air, the vacuum won't turn on at ...
How to open the casing - kenmore intuition 116.312 Similar to your Kenmore upright is the canister. Here is a video clip by another with similar issue of trying to open the darn thing up. I hope this ...
Question about Oreck Air Purifiers
My oreck magnesium keeps turning off. Blue. Light keeps blinking THE PROBLEM SEAMS TO BE WITH THE THICKNESS OF THE CARPET AND THE PAD-ALL VACUUMS NEED TO BE ABLE TO BREATHE IF THE PAD AND THE CARPET ...
Question about Alpine Air Air Purifiers
Need To Eliminate Mystery Odor that Causes Alergy Like Problems Need recommendation for air purifier that will cure odor problem and is a good value; upfront cost as well as long term parts ...
Question about Electrolux Air Purifiers
electrolux legacy,plug light on,bag light on,replaced bag, still no power replaced bag, checked hose for obstructions. used toe vacuum fine dust Bad on/off switch? Possible contact problem inside the ...
My electrolux Nimbles roller is not working. The roller/beater is not working, but I still have suction. It is still under warranty. A common problem with roller/beaters is hair caught in the bearings
hoover windtunnel air - stopped working Stopped working, Loud noise and air being blown through the port on the top of the canister underneath the handle. I just has the same problem, there is a clog ...
...just leave your problem on this page, and I would be more then happy to answer your questions or problems with the Loveless Ash Vac's. We sell these products, and I'm pretty familar with them, I'd ...
honeywell 703 central vacuum seems very hot after using David I recently purchased the same unit and had the same issue. I have since received a replacement and realized where the problem was for me. ...
Question about Kenmore Air Purifiers
vacuum starts and stops when the hose assembly is moved. do you replace the entire hose assembly or take it apart to find the problem? Hello, it sounds like you make have a wire loose in your canister
28 questions posted
Usually answered in minutes!
11 Questions