Question about Canon MultiPASS Office Equipment & Supplies
...a "waste ink tank full" error. Replacing the waste ink absorption pads is something an authorized canon service facility can take care of for you. Once they are replaced, it'll be functional
...waste tank requires the disassembly of the printer and the replacement of the tank with a replacement kit. Typically the kit will cost around $25 and the labor at a service dealer about $75. Get a ...
Question about Canon MultiPASS Office Equipment & Supplies
replace. I believe it is a built in number of prints allowed before the message is given, say maybe 10,000. I don't believe it has anything to do at all with the waste ink absorber being full. It is a
...replace the waste ink pads in the bottom of the machine. It's a dirty job and complicated since you have to remove the entire print assembly to get at them. After changing you have to have access to ...
Question about Canon MultiPASS Office Equipment & Supplies
...waste ink tank - Ray Try: How do I confirm the ink tanks are installed properly? How do I replace or insert an ink tank? What are the recommended ink tanks for this printer? What ink(s) / ink tank(s) ...
...replace it... Good Luck! The waste ink tank needs to be replaced. You might need an engineer to do this. It might be expensive too. better try to dip it in mild hot water for few minutes and replace ...
Question about Canon MultiPASS Office Equipment & Supplies
...waste ink tank located? I need to empty it or replace it whichever, then reset the counter. Help!! First off to do it will take you about an hour, cost you between 10 to 30 dollars. The best ...
Question about Canon MultiPASS Office Equipment & Supplies
replace the waste ink tank on my multipass MP390? this is the sequence that worked, and do not worry about the pad, it is a sponge that you can take it out gently yourself, wash it and put it back, no
...replace the ink absorbers at this point if you do not want to pad them dry. Then Proceed to the Waste Tank Reset procedure below: To reset waste tank full error in MP730. 1. Press the "menu": Key 2. ...
Question about Canon MultiPASS Office Equipment & Supplies
...waste tank nearly full How do you clear this This is a pair of sponge that absorbs excess ink after you print a page. You can get a service kit from Canon or just pull them out and rinse clean. ...
137 questions posted
Usually answered in minutes!
427 Questions
315 Questions
111 Questions
109 Questions
81 Questions