...print head cleaning. Select [HEAD REFRESHING] for deep print head cleaning. Note: [HEAD REFRESHING] uses more ink than [HEAD CLEANING], so perform [HEAD REFRESHING] only when necessary. 5. Press . 6. ...
...print head by rocking it forward first and lift it out. Place the print head in a small container that does not allow for much room on any of the sides. Pour rubbing alcohol into the container and ...
...print head and now cannot print either black or color. Even after head cleanings. There is ink in the print head well but not obvious on the paper side of the print head???? the Cartridges is Jammed ...
...print head cleaning. Select [HEAD REFRESHING] for deep print head cleaning. Note: [HEAD REFRESHING] uses more ink than [HEAD CLEANING], so perform [HEAD REFRESHING] only when necessary. Press . Print ...
Question about Canon MultiPASS Office Equipment & Supplies
print head. You have two options for cleaning the print head a normal clean and a deep clean, start by doing a normal clean if required try doing a deep clean. You can download the manual here: http:/
print head alignment and nozzle checks. I did a deep cleaning, and it still does not print. Any ideas? hi this is nichu, you have done everything correct but the ink is low in your catridges refill it
Question about Canon MultiPASS Office Equipment & Supplies
...print head out of the printer, and run warm water from the tap (not high pressure), over the ports for about 5 minutes. Ink will drop out of the jets. Dont touch the electrical contact end of this ...
...print head, & checked nozzle (all have been done a few times). I'm going crazy! I can't afford a new printer right now. It doesn't print anything from the computer nor from the copier. > have ...
...print head nozzles. If the print head cleaning maintenance routine does not clear the blockages,then print head needs replacing, but it may be expensive. It may be more cost effective to buy a later ...
print head may be blocked. Try several deep cleaning of the print head to see if it can clear the blocked print nozzles. If none of this works then the print head needs to be replaced. A new cartridge
365 questions posted
Usually answered in minutes!
427 Questions
121 Questions
111 Questions
109 Questions
81 Questions
