Compaq Presario 5000 PC Desktop "resetting memory seats new positions" Questions

...new power supply, and assuming it is still installed, pull the main connector from the motherboard and jump across from the green wire to one of the black wires next to it just long enough to see if ...

new memory, it may be not compatible with your MOBO or the memory is bad. So just remove the memory and try to reboot that should be working fine... Hope that helps........ Hey, Remove all memory from

...new memory is correct for your computer. 2. Make sure that the DIMMs are installed in pairs; then, restart the computer. 3. Reseat the DIMMs. 4. Replace the following components one at a time, in the ...

memory positions unplug the power from your computer and crack the case. Unplug the power supply from the board. Then plug it back up and try it again sometimes this resets it and it will start again.

new board (not having been fired up until now) though if you happen to have an optic thermometer or right handy thermometer to doublecheck the board's power supply temperatures, that's a handy

...new battery with the + sign up.Make SURE that all cables are tight, and the Ram Memory slot locks, are still locked into place.{If the computer does not start, hold the Power On button in for 10 ...

Memory, Graphics card(?), and harddrive, for an expensive paperweight.Anti-Static Precautions:Your body carries Static electricity. Static WILL fry out (Short Circuit) the delicate hardware components

...new power supply and hp a430n is back running...using a cooler master 500w $60...I have added a 1GB memory module for $50 to the existing 512MB and that smooths out the hard drive use. also changed ...